Boosting Superior Lithium Storage Performance of Alloy‐Based Anode Materials via Ultraconformal Sb Coating–Derived Favorable Solid‐Electrolyte Interphase

Alloy materials such as Si and Ge are attractive as high‐capacity anodes for rechargeable batteries, but such anodes undergo severe capacity degradation during discharge–charge processes. Compared to the over‐emphasized efforts on the electrode structure design to mitigate the volume changes, understanding and engineering of the solid‐electrolyte interphase (SEI) are significantly lacking. This work demonstrates that modifying the surface of alloy‐based anode materials by building an ultraconformal layer of Sb can significantly enhance their structural and interfacial stability during cycling. Combined experimental and theoretical studies consistently reveal that the ultraconformal Sb layer is dynamically converted to Li₃Sb during cycling, which can selectively adsorb and catalytically decompose electrolyte additives to form a robust, thin, and dense LiF‐dominated SEI, and simultaneously restrain the decomposition of electrolyte solvents. Hence, the Sb‐coated porous Ge electrode delivers much higher initial Coulombic efficiency of 85% and higher reversible capacity of 1046 mAh g^?1 after 200 cycles at 500 mA g^?1, compared to only 72% and 170 mAh g^?1 for bare porous Ge. The present finding has indicated that tailoring surface structures of electrode materials is an appealing approach to construct a robust SEI and achieve long‐term cycling stability for alloy‐based anode materials.     

Enhanced Rate Capability of Ion‐Accessible Ti3C2Tx‐NbN Hybrid Electrodes

Although 2D Ti₃C₂T_x is a good candidate for supercapacitors, the restacking of nanosheets hinders the ion transport significantly at high scan rates, especially under practical mass loading (>10 mg cm^?2) and thickness (tens of microns). Here, Ti₃C₂T_x‐NbN hybrid film is designed by self‐assembling Ti₃C₂T_x with 2D arrays of NbN nanocrystals. Working as an interlayer spacer of Ti₃C₂T_x, NbN facilitates the ion penetration through its 2D porous structure; even at extremely high scan rates. The hybrid film shows a thickness‐independent rate performance (almost the same rate capabilities from 2 to 20 000 mV s^?1) for 3 and 50 µm thick electrodes. Even a 109 µm thick Ti₃C₂T_x‐NbN electrode shows a better rate performance than 25 µm thick pure Ti₃C₂T_x electrodes. This method may pave a way to controlling ion transport in electrodes composed of 2D conductive materials, which have potential applications in high‐rate energy storage and beyond.     

Revisiting the Role of Conductivity and Polarity of Host Materials for Long‐Life Lithium–Sulfur Battery

Despite their high theoretical energy density and low cost, lithium–sulfur batteries (LSBs) suffer from poor cycle life and low energy efficiency owing to the polysulfides shuttle and the electronic insulating nature of sulfur. Conductivity and polarity are two critical parameters for the search of optimal sulfur host materials. However, their role in immobilizing polysulfides and enhancing redox kinetics for long‐life LSBs are not fully understood. This work has conducted an evaluation on the role of polarity over conductivity by using a polar but nonconductive platelet ordered mesoporous silica (pOMS) and its replica platelet ordered mesoporous carbon (pOMC), which is conductive but nonpolar. It is found that the polar pOMS/S cathode with a sulfur mass fraction of 80 wt% demonstrates outstanding long‐term cycle stability for 2000 cycles even at a high current density of 2C. Furthermore, the pOMS/S cathode with a high sulfur loading of 6.5 mg cm^?2 illustrates high areal and volumetric capacities with high capacity retention. Complementary physical and electrochemical probes clearly show that surface polarity and structure are more dominant factors for sulfur utilization efficiency and long‐life, while the conductivity can be compensated by the conductive agent involved as a required electrode material during electrode preparation. The present findings shed new light on the design principles of sulfur hosts towards long‐life and highly efficient LSBs.     

PVP Treatment Induced Gradient Oxygen Doping in In2S3 Nanosheet to Boost Solar Water Oxidation of WO3 Nanoarray Photoanode

The photoelectrochemical performance of the WO₃ photoanode is limited by the severe charge recombination in the bulk phase and at the WO₃/electrolyte interface. Herein, In₂S₃ nanosheets are integrated onto the surface of the WO₃ nanowall array photoanode, followed by a facile polyvinylpyrrolidone (PVP) solution treatment. The PVP treatment results in sulfur vacancies and a gradient oxygen doping into In₂S₃ from surface to interior, which induces the formation of a gradient energy band distribution. The gradient band structured In₂S₃ and type II band alignment at the WO₃/In₂S₃ interface simultaneously create a channel that favors photogenerated electrons to migrate from the surface to the conductive substrate, thereby suppressing bulk carrier recombination. Meanwhile, the sulfur vacancies and oxygen doping contribute to increased charge carrier concentration, prolonged carrier lifetime, more active sites, and small interfacial transfer impedance. As a consequence, the PVP treated WO₃/In₂S₃ heterostructure photoanode exhibits a significantly enhanced photocurrent of 1.61 mA cm^?2 at 1.23 V versus reversible hydrogen electrode (RHE) and negative onset potential of 0.02 V versus RHE.     

New Lithium Salt Forms Interphases Suppressing Both Li Dendrite and Polysulfide Shuttling

Lithium–sulfur batteries (LSBs) are considered promising candidates for the next‐generation energy‐storage systems due to their high theoretical capacity and prevalent abundance of sulfur. Their reversible operation, however, encounters challenges from both the anode, where dendritic and dead Li‐metal form, and the cathode, where polysulfides dissolve and become parasitic shuttles. Both issues arise from the imperfection of interphases between electrolyte and electrode. Herein, a new lithium salt based on an imide anion with fluorination and unsaturation in its structure is reported, whose interphasial chemistries resolve these issues simultaneously. Lithium 1, 1, 2, 2, 3, 3‐hexafluoropropane‐1, 3‐disulfonimide (LiHFDF) forms highly fluorinated interphases at both anode and cathode surfaces, which effectively suppress formation of Li‐dendrites and dissolution/shuttling of polysulfides, and significantly improves the electrochemical reversibility of LSBs. In a broader context, this new Li salt offers a new perspective for diversified beyond Li‐ion chemistries that rely on a Li‐metal anode and active cathode materials.     

Synthesis of n-butyl acetate via reactive distillation column using Candida Antarctica lipase as catalyst

Bioprocess and Biosystems Engineering - The reactive distillation process for the synthesis of n-butyl acetate via transesterification of ethyl acetate with n-butyl alcohol catalyzed by immobilized...     

Economical production of isomaltulose from agricultural residues in a system with sucrose isomerase displayed on Bacillus subtilis spores

Bioprocess and Biosystems Engineering - A safe, efficient, environmentally friendly process for producing isomaltulose is needed. Here, the biocatalyst, sucrose isomerase (SIase) from Erwinia...     

腹腔镜结肠癌根治术治疗老年局部进展期结肠癌的疗效和安全性及对患者免疫功能的影响

目的:比较分析腹腔镜和开腹结肠癌根治术治疗老年局部进展期结肠癌的临床疗效和安全性及对患者免疫功能的影响。方法:根据随机数字表法,将64例老年局部进展期结肠癌患者随机分为腹腔镜组和开腹组,每组各32例,分别接受腹腔镜、开腹结肠癌根治术治疗。比较两组手术相关指标、手术前后免疫功能变化、术后近远期并发症的发生情况及预后。结果:与开腹组比较,腹腔镜组患者手术时间明显延长,而术中出血量、胃肠功能恢复时间则明显缩短(P<0.05)。两组淋巴结清扫数比较差异无统计学意义(P>0.05)。术后3个月,腹腔镜组CD4+、CD4+/CD8+比值均明显高于开腹组(P<0.05),且与术前比较差异均无统计学意义(P>0.05)。与开腹组比较,腹腔镜组患者术后切口感染的发生率明显降低(P<0.05),两组其他近期并发症如吻合口瘘、吻合口出血,远期并发症如黏连性肠梗阻、切口疝的发生率比较差异均无统计学意义(P>0.05)。腹腔镜组与开腹组术后2年的局部复发率、1年和2年生存率比较差异均无统计学意义(P>0.05)。结论:腹腔镜手术和开腹手术治疗老年局部进展期结肠癌患者的临床疗效和预后相当,但腹腔镜手术对患者的免疫功能影响更小,且安全性更高。     

结直肠癌肝转移患者血清OPN、YKL-40、HGF和VEGF-A水平及其危险因素分析

目的:检测结直肠癌肝转移患者血清骨桥蛋白(Osteopontin,OPN)、人类软骨糖蛋白-39(Human cartilage gp-39,YKL-40)、肝细胞生长因子(Hepatocyte growth factor,HGF)和血管内皮生长因子A(Vascular endothelial growth factor A,VEGF-A)水平,并分析直肠癌患者发生肝转移的危险因素。方法:收集56例发生肝转移的直结肠癌患者和50例未发生肝转移的直结肠癌患者,采用酶联免疫法检测两组患者血清OPN、YKL-40、HGF和VEGF-A的水平。收集所有患者的临床资料,分析直肠癌患者发生肝转移的危险因素。结果:结直肠癌肝转移患者血清OPN、YKL-40、HGF和VEGF-A水平均显著高于未发生肝转移的直结肠癌患者(P0.05);糖尿病、肿瘤最大直径、病理类型、分化程度、浸润深度、淋巴结转移、盆腹膜种植、肝外转移、吸烟史均与结直肠癌发生肝转移相关(P0.05);而HGF、VEGF-A、糖尿病、肿瘤最大直径≥5 cm、淋巴结转移、盆腹膜种植、肝外转移是直肠癌发生肝转移的独立危险因素(P0.05)。结论:结直肠癌肝转移患者血清OPN、YKL-40、HGF和VEGF-A明显升高,HGF、VEGF-A、糖尿病、肿瘤最大直径≥5 cm、淋巴结转移、盆腹膜种植、肝外转移是直肠癌发生肝转移的独立危险因素。     

乌司他丁联合连续性肾脏替代治疗对严重脓毒症患者炎症反应和血流动力学的影响

目的:探讨乌司他丁联合连续性肾脏替代(CRRT)治疗对严重脓毒症患者炎症反应和血流动力学的影响。方法:选取2015年5月～2019年4月期间我院收治的严重脓毒症患者119例,将所有患者根据随机数字表法分为对照组(n=59)和研究组(n=60),对照组给予CRRT治疗,研究组在对照组基础上联合乌司他丁治疗,比较两组患者临床疗效、炎症反应指标、血流动力学参数,记录两组患者住院时间及28d内病死率。结果:研究组治疗7 d后的临床总有效率高于对照组(P0.05)。两组治疗7 d后血清白介素-6(IL-6)、降钙素原(PCT)、肿瘤坏死因子-α(TNF-α)水平均下降,且研究组低于对照组(P0.05)。两组患者治疗7 d后心率、平均动脉压(MAP)、血乳酸下降,氧合指数升高(P0.05),研究组治疗7 d后氧合指数高于对照组,血乳酸则低于对照组(P0.05)。研究组住院时间短于对照组(P0.05),两组28d内病死率比较无统计学差异(P0.05)。结论:乌司他丁联合CRRT治疗严重脓毒症患者的疗效确切,可有效抑制机体炎症反应,改善血流动力学,减少住院时间,具有一定的临床应用价值。